Sign up & enjoy 20% off
Free shipping in Delhi/NCR
Welcome to V Aqua
India's Trusted Brand
5308+ Satisfied Customer
Call : 9560654995 / 7827654995
Flat 20% OFF
Wastewater Clarification System

Wastewater Clarification System Manufacturer in India

Wastewater generated by industries often contains suspended solids, floating impurities, organic matter, oil, grease, and other pollutants. Before this wastewater can be discharged or reused, these contaminants must be removed through an appropriate treatment process.

A Wastewater Clarification System is an important part of an industrial Effluent Treatment Plant (ETP). It separates suspended particles, chemical flocs, and biological solids from wastewater, helping improve water clarity and preparing the treated water for further treatment.

Industries that require higher-quality treated water can integrate clarification with advanced filtration technologies such as Multimedia Filtration (MGF), Activated Carbon Filtration (ACF), Ultrafiltration (UF), and Reverse Osmosis (RO).

V AQUA Water Treatment Company provides customised wastewater treatment solutions, including industrial ETP plants, clarification systems, advanced filtration, UF plants, and RO plants for different industrial applications.

What Is a Wastewater Clarification System?

A Wastewater Clarification System is a treatment arrangement used to separate suspended solids and other settleable or floatable impurities from wastewater.

During clarification, wastewater is kept under controlled conditions so that heavier particles settle at the bottom of a tank as sludge, while lighter materials may float to the surface and be removed.

Chemical coagulants and flocculants can also be added when fine suspended particles need to be combined into larger flocs for easier separation.

Clarification is commonly used in industrial ETP plants after chemical treatment or biological treatment. It helps reduce suspended solids and improve the quality of water before it enters the next treatment stage.

However, clarification alone does not remove all dissolved pollutants, dissolved salts, or microorganisms. Additional treatment may be required depending on the final water quality requirement.

Why Is Wastewater Clarification Important in an ETP Plant?

Suspended solids and fine particles can affect the performance of downstream treatment equipment. If these impurities are not removed properly, they may cause pipeline blockages, filter clogging, membrane fouling, and poor treated-water quality.

A properly designed clarification system helps:

  • Remove settleable suspended solids from wastewater.
  • Separate chemical flocs formed during coagulation and flocculation.
  • Separate biological sludge after biological treatment.
  • Reduce the suspended-solids load on downstream filtration systems.
  • Improve water clarity and treatment performance.
  • Protect UF and RO membranes from excessive particle loading when combined with suitable pretreatment.
  • Support industrial wastewater treatment and water reuse applications.

How Does a Wastewater Clarification System Work?

A clarification system generally works through gravity settling, chemical-assisted separation, or a combination of treatment methods.

The process can be explained through the following stages.

1. Wastewater Collection

Industrial wastewater is collected in a collection tank or sump before entering the ETP plant.

The incoming wastewater may contain suspended particles, organic matter, chemicals, oil, grease, and other impurities depending on the industry.

2. Screening and Preliminary Treatment

A screening system removes larger floating materials, plastics, fibres, and other physical impurities.

If wastewater contains free oil and grease, a suitable oil-water separator or skimming arrangement may be installed before further treatment.

3. Coagulation

Coagulation involves adding suitable chemicals to wastewater to destabilise fine suspended particles and colloids.

These particles can be difficult to remove through ordinary settling because they remain dispersed in water.

4. Flocculation

During flocculation, gentle mixing helps destabilised particles combine into larger flocs.

These flocs become easier to separate through sedimentation or flotation.

Chemical selection and dosage should be established through laboratory testing or jar testing.

5. Sedimentation and Clarification

The chemically treated wastewater enters a clarifier or settling tank.

The heavier flocs settle towards the bottom under gravity, forming sludge. The clarified water is collected from the upper section through a suitable outlet arrangement.

6. Sludge Collection and Removal

The settled sludge is collected from the bottom of the clarifier using a sludge collection mechanism or suitable sludge removal arrangement.

The collected sludge is transferred for further thickening, dewatering, treatment, and disposal according to its characteristics and applicable requirements.

7. Further Treatment

The clarified water can move to the next treatment stage, such as biological treatment, filtration, UF, or RO, depending on the ETP process design.

Complete Wastewater Treatment Process Using ETP, Clarification, UF and RO

For industries looking for effective wastewater treatment and improved treated-water quality, clarification can be integrated into a complete ETP and advanced filtration system.

The first stage is the ETP plant, which includes the required preliminary, chemical, biological, and clarification processes. Advanced filtration and membrane technologies can then be added according to the final water quality requirement.

Stage 1: Effluent Treatment Plant (ETP)

The ETP plant is the primary wastewater treatment system for industrial effluent.

It is designed to reduce suspended solids, organic pollutants, oil and grease, and other contaminants before the water enters advanced filtration.

A typical ETP process may include:

1. Screening: Removes large floating materials and physical impurities.

2. Oil and Grease Removal: Separates free-floating oil and grease using gravity separators, oil skimmers, or other suitable arrangements.

3. Equalisation Tank: Balances variations in wastewater flow and pollutant concentration.

4. Chemical Treatment: Coagulants and flocculants may be added to remove fine suspended particles, colloids, and certain other impurities.

5. Primary Clarifier: Separates chemical flocs and settleable suspended solids from wastewater.

6. Biological Treatment: Where biodegradable organic pollutants are present, suitable biological treatment such as MBBR, MBR, or activated sludge processes may be provided.

7. Secondary Clarifier: Separates biological sludge from treated water where the selected biological process requires a secondary clarifier.

The actual ETP configuration depends on wastewater analysis, including pH, BOD, COD, TSS, oil and grease, and other relevant parameters.

Stage 2: Advanced Filtration System – MGF/PSF and ACF

After ETP treatment and clarification, the water may still contain residual suspended particles, turbidity, colour, and certain organic compounds.

An advanced filtration system can be installed to improve the water quality before membrane treatment.

Multimedia Filter (MGF) or Pressure Sand Filter (PSF)

Removes residual suspended solids, turbidity, and fine particulate matter from clarified wastewater.

Activated Carbon Filter (ACF)

Helps reduce certain dissolved organic compounds, colour, and odour-causing substances, depending on the water characteristics.

Micron Cartridge Filter

Provides additional particle filtration and protects downstream UF or RO membranes from larger particles.

These filtration stages help improve the feed-water quality before advanced membrane treatment.

Stage 3: Ultrafiltration (UF) Plant

For industries requiring finer filtration, an Ultrafiltration (UF) plant can be installed after the ETP and advanced filtration system.

UF is a membrane-based treatment technology that removes fine suspended solids, colloidal particles, and many microorganisms.

A UF plant can help remove:

  • Fine suspended solids.
  • Colloidal particles.
  • Residual turbidity.
  • Many bacteria and other microorganisms.
  • Other particles larger than the membrane’s effective separation range.

UF produces filtered water with improved consistency and can provide better feed water for a downstream RO plant.

Important: UF does not significantly reduce TDS or remove dissolved salts. If the application requires dissolved salt reduction, an RO plant may be required after UF.

Stage 4: Reverse Osmosis (RO) Plant

When the treated wastewater requires further purification, particularly for reducing dissolved salts and TDS, an RO plant can be installed after UF.

Reverse Osmosis uses semi-permeable membranes to separate a large proportion of dissolved salts and other dissolved constituents from water.

An industrial RO plant can help reduce:

  • Total Dissolved Solids (TDS).
  • Dissolved salts.
  • Certain dissolved inorganic contaminants.
  • Other constituents depending on feed-water quality and membrane selection.

The RO plant produces two streams:

RO Permeate: Purified water that may be suitable for industrial reuse after checking the required application quality.

RO Reject: A concentrated stream containing rejected salts and contaminants that requires suitable treatment, recovery, or disposal.

RO recovery and reject management should be planned according to feed-water quality and site requirements.

Complete Wastewater Clarification and Treatment Process Flow

An illustrative industrial wastewater treatment arrangement is:

Industrial Wastewater → Screening → Oil and Grease Removal → Equalisation Tank → Chemical Treatment → Primary Clarifier → Biological Treatment (if required) → Secondary Clarifier (if required) → MGF/PSF → ACF → Micron Cartridge Filter → UF Plant → RO Plant → Treated Water Storage Tank

The exact configuration depends on the type of wastewater, the treatment objective, and the intended use of the treated water.

The system can be selected according to the following requirements:

  • ETP with Clarification: For reducing suspended solids, chemical flocs, and other removable pollutants.
  • ETP + Advanced Filtration: For additional reduction of turbidity, residual suspended particles, and certain organic impurities.
  • ETP + Advanced Filtration + UF: For finer particle removal and improved membrane-feed quality.
  • ETP + Advanced Filtration + UF + RO: For further purification and dissolved salt/TDS reduction.

Not every industry requires all these stages. The system should be designed according to wastewater analysis and the required treated-water quality.

Types of Wastewater Clarification Systems

Different clarification technologies are available for industrial wastewater treatment. The correct selection depends on the suspended solids, particle characteristics, flow rate, and treatment requirements.

1. Primary Clarifier

A primary clarifier is used to separate settleable suspended solids from wastewater before biological treatment or further processing.

Heavier particles settle at the bottom, while clarified water is collected from the upper section.

Applications:

  • Industrial ETP plants.
  • Food processing wastewater.
  • Manufacturing wastewater.
  • Wastewater containing settleable solids.

2. Secondary Clarifier

A secondary clarifier is commonly used after biological treatment.

It separates biological sludge from treated wastewater. The settled sludge may be partly recycled to maintain the biological treatment process, with excess sludge removed for further handling.

Applications:

  • MBBR-based ETP plants.
  • Activated sludge treatment systems.
  • Biological wastewater treatment plants.
  • Industrial and municipal wastewater treatment.

3. Tube Settler Clarifier

A tube settler clarifier uses inclined tube modules to increase the effective settling area within a compact installation.

It helps improve the settling of suspended solids and can reduce the footprint required compared with a conventional settling arrangement for suitable applications.

Applications:

  • Industrial ETP plants.
  • Water treatment plants.
  • Chemical treatment systems.
  • Compact wastewater treatment facilities.

4. Lamella Clarifier

A lamella clarifier uses inclined plates to improve particle settling by increasing the available settling surface.

It is useful where compact clarification equipment is required and wastewater contains particles that can settle under suitable operating conditions.

Applications:

  • Industrial wastewater treatment.
  • Chemical processing industries.
  • Manufacturing units.
  • Water and effluent treatment plants.

5. Dissolved Air Flotation (DAF)

DAF is a flotation-based separation technology rather than a conventional gravity clarifier.

It uses fine air bubbles to attach to suspended particles, oil, grease, and flocs, helping them float to the water surface for removal.

DAF is particularly useful when wastewater contains lightweight particles, fats, oils, grease, or solids that do not settle easily.

Applications:

  • Food processing industries.
  • Dairy industries.
  • Oil-contaminated wastewater.
  • Automobile and engineering industries.
  • Industrial wastewater with fine suspended particles.

Industries That Require Wastewater Clarification Systems

Wastewater clarification systems are used across industries that generate wastewater containing suspended solids, chemical flocs, or biological solids.

IndustryCommon Wastewater Impurities
Textile IndustrySuspended solids, colour, fibres and chemicals
Food Processing IndustryOrganic matter, food particles and fats
Dairy IndustryMilk solids, fats and organic waste
Automobile IndustryOil, grease and suspended particles
Chemical IndustryChemical precipitates and suspended solids
Pharmaceutical IndustryProcess-related solids and organic impurities
Paper IndustryFibres, pulp and suspended solids
Steel IndustryScale particles, suspended solids and process residues
Metal ProcessingMetal particles, oils and chemical residues
Manufacturing UnitsProcess solids, dust and other impurities

The clarification technology should be selected according to the actual wastewater composition and treatment requirements.

Key Components of a Wastewater Clarification System

A customised wastewater clarification system may include:

  1. Collection Tank: Receives industrial wastewater.
  2. Screening System: Removes large physical impurities.
  3. Equalisation Tank: Balances wastewater flow and quality.
  4. Chemical Dosing System: Adds coagulants and flocculants when required.
  5. Flash Mixer: Provides rapid mixing for chemical dispersion.
  6. Flocculation Tank: Encourages the formation of larger flocs.
  7. Clarifier Tank: Separates suspended solids through settling.
  8. Tube Settler or Lamella Plates: Improve settling performance where suitable.
  9. Sludge Collection Mechanism: Collects settled sludge.
  10. Sludge Transfer Pump: Transfers sludge for further handling.
  11. Effluent Transfer Pump: Moves clarified water to subsequent treatment stages.
  12. Control Panel and Instruments: Controls and monitors system operation.

The equipment configuration depends on the plant capacity, wastewater characteristics, and required treatment performance.

Benefits of Installing a Wastewater Clarification System

A properly designed clarification system provides several operational benefits.

1. Effective Suspended Solids Removal

Helps separate settleable particles and chemical flocs from industrial wastewater.

2. Improved Water Clarity

Reduces visible suspended impurities and improves the clarity of treated wastewater.

3. Better ETP Performance

Supports efficient operation of downstream biological and filtration processes.

4. Reduced Filter Loading

Reduces the amount of suspended solids entering pressure filters and other polishing equipment.

5. Membrane Protection

Helps reduce particulate loading on UF and RO systems when combined with suitable pretreatment.

6. Better Sludge Management

Provides a defined arrangement for collecting and handling settled sludge.

7. Supports Water Recycling

Clarified water can undergo additional filtration and purification for suitable industrial reuse applications.

Factors to Consider Before Selecting a Wastewater Clarification System

Selecting the correct clarification technology is important for reliable performance.

Industries should evaluate the following parameters before finalising the system:

  • Wastewater flow rate in KLD or m³/hr.
  • Initial suspended solids concentration.
  • Particle size and settling characteristics.
  • pH value.
  • BOD and COD levels.
  • Oil and grease concentration.
  • Chemical composition of wastewater.
  • Required treated-water quality.
  • Available installation space.
  • Sludge generation and handling requirements.
  • Requirement for downstream filtration, UF, or RO.

Jar testing and laboratory analysis can help determine suitable coagulants, flocculants, and treatment conditions. Settling tests may also be required to evaluate clarification performance.

Wastewater Clarification System Price in India

The cost of a Wastewater Clarification System depends on plant capacity, technology selection, wastewater characteristics, construction materials, and the required treatment performance.

A basic settling tank will have a different cost compared with a complete chemical clarification system containing flash mixing, flocculation, lamella plates, sludge collection, and automated controls.

Major cost factors include:

  • Plant capacity in KLD.
  • Clarifier type and design.
  • Tank size and material of construction.
  • Chemical dosing equipment.
  • Flash mixer and flocculation system.
  • Tube settler or lamella modules.
  • Sludge collection and transfer equipment.
  • Pumps, piping, and instrumentation.
  • Automation and control panel.
  • Installation and commissioning requirements.
  • Additional filtration, UF, and RO requirements.

For an accurate quotation, industries should provide their wastewater analysis report, flow rate, and required treated-water quality.

Why Choose V AQUA for Wastewater Clarification Systems?

V AQUA Water Treatment Company provides customised industrial wastewater treatment solutions for different industries and applications.

Our solutions are designed according to wastewater characteristics, treatment capacity, and the required discharge or reuse quality.

Our industrial water treatment solutions include:

  • Industrial Effluent Treatment Plants (ETP).
  • Wastewater Clarification Systems.
  • Primary and Secondary Clarifiers.
  • Tube Settler and Lamella Clarifier Systems.
  • Chemical Coagulation and Flocculation Systems.
  • Dissolved Air Flotation (DAF) Systems.
  • Pressure Sand and Multimedia Filtration Systems.
  • Activated Carbon Filtration Systems.
  • Ultrafiltration (UF) Plants.
  • Reverse Osmosis (RO) Plants.
  • Industrial Wastewater Recycling Systems.

Whether you require a standalone clarification system or a complete ETP plant with advanced filtration, UF, and RO technology, V AQUA can help you select a suitable treatment solution for your industry.

Frequently Asked Questions (FAQs)

1. What is a Wastewater Clarification System?

A Wastewater Clarification System separates suspended solids, chemical flocs, and other settleable impurities from wastewater through sedimentation or other suitable separation technologies.

2. What is the purpose of a clarifier in an ETP plant?

A clarifier separates suspended particles and sludge from wastewater. It helps improve water clarity and reduces the solids load entering downstream treatment processes.

3. What is the difference between a primary and secondary clarifier?

A primary clarifier generally separates settleable solids before biological treatment. A secondary clarifier separates biological sludge from treated wastewater after biological treatment.

4. What is the difference between a clarifier and a DAF system?

A conventional clarifier primarily separates particles through gravity settling. A DAF system uses fine air bubbles to float particles, oil, grease, and flocs to the surface. The correct technology depends on the wastewater characteristics.

5. Can a clarification system remove TDS from wastewater?

No. Conventional clarification mainly removes suspended and settleable solids. It does not significantly remove dissolved salts or TDS. RO may be required when dissolved salt reduction is necessary.

6. Is chemical dosing necessary for wastewater clarification?

Not always. Chemical dosing is used when fine particles or colloids do not settle effectively on their own. Coagulants and flocculants can help form larger flocs that are easier to separate.

7. Can clarified wastewater be reused?

Yes, provided the water meets the quality requirements of the intended reuse application. Additional filtration, UF, RO, or disinfection may be required depending on the application.

8. Why is UF installed after clarification?

UF removes fine suspended particles, colloids, and many microorganisms that may remain after clarification and conventional filtration. It can improve the feed-water quality for a downstream RO plant.

9. Is RO necessary after a wastewater clarification system?

No. RO is required when further purification, particularly dissolved salt and TDS reduction, is needed. The requirement depends on the intended reuse application and feed-water quality.

10. How can I get a quotation for a Wastewater Clarification System?

Share your wastewater generation capacity, laboratory analysis report, and required treated-water quality with V AQUA. Our team can evaluate the requirements and recommend a suitable clarification and ETP configuration.

Contact V AQUA for Wastewater Clarification System

Looking for a reliable Wastewater Clarification System Manufacturer in India?

Contact V AQUA Water Treatment Company for customised industrial ETP plants, clarification systems, advanced filtration, UF, and RO treatment solutions.

V AQUA Water Treatment Company

Contact our team to discuss your wastewater treatment requirements and get a suitable solution for your industrial facility.

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
What Our Clients Say
3750 reviews