Industries, commercial establishments, residential societies, hotels, and hospitals generate large quantities of wastewater every day. Treating this wastewater effectively is important not only for environmental protection but also for reducing freshwater consumption and supporting sustainable water management.
While primary and secondary treatment processes remove a significant portion of wastewater pollutants, the treated water may still contain fine suspended particles, residual organic matter, nutrients, dissolved salts, and microorganisms. Additional treatment is often required before the water can be reused or discharged according to applicable standards.
A Tertiary Wastewater Treatment Plant provides this additional level of purification. It uses advanced filtration, membrane separation, disinfection, and other specialised treatment technologies to improve the quality of water after primary and secondary treatment.
V AQUA Water Treatment Company offers customised industrial and commercial water treatment solutions, including tertiary filtration and wastewater recycling systems designed according to project requirements.
Whether you need a tertiary treatment system for an existing ETP, STP, or an industrial wastewater recycling project, selecting the right filtration technologies is essential for achieving the required treated water quality.
What Is a Tertiary Wastewater Treatment Plant?
A Tertiary Wastewater Treatment Plant is the final or advanced treatment stage in a wastewater treatment process. It is generally installed after primary and secondary treatment to remove remaining contaminants that may not have been adequately removed during earlier stages.
Primary treatment mainly removes larger suspended solids and floating materials, while secondary treatment uses biological processes to reduce biodegradable organic pollutants.
Tertiary treatment provides additional purification through specialised filtration and treatment technologies.
Depending on the incoming water quality and final treatment requirements, a tertiary wastewater treatment system may include:
- Pressure Sand Filter (PSF).
- Multi-Grade Filter (MGF).
- Activated Carbon Filter (ACF).
- Micron Cartridge Filter.
- Ultrafiltration (UF) System.
- Reverse Osmosis (RO) Plant.
- UV Disinfection System.
- Chlorination System.
- Chemical dosing arrangements.
- Nutrient removal systems.
- Advanced oxidation processes.
Not every project requires all these technologies. The final configuration depends on wastewater characteristics, treated water reuse requirements, and applicable discharge standards.
Why Is Tertiary Wastewater Treatment Important?
Primary and secondary treatment can significantly improve wastewater quality. However, the treated water may still contain contaminants that require additional removal.
For example, water leaving a conventional biological treatment plant may contain residual suspended solids, turbidity, microorganisms, and dissolved substances.
If this water is intended for industrial reuse, cooling tower applications, floor cleaning, gardening, or other non-potable purposes, additional filtration and disinfection may be necessary.
Tertiary wastewater treatment helps bridge this gap between secondary-treated wastewater and the required final water quality.
Key Reasons to Install a Tertiary Treatment System
- Improve the quality of secondary-treated wastewater.
- Remove remaining suspended solids and fine particles.
- Reduce turbidity and improve water clarity.
- Remove certain residual organic impurities.
- Reduce microbiological contamination through suitable disinfection.
- Support industrial wastewater recycling.
- Help meet applicable treated water discharge requirements.
- Reduce freshwater consumption through water reuse.
How Does a Tertiary Wastewater Treatment Plant Work?
A tertiary wastewater treatment plant generally receives water from an existing ETP or STP after primary and secondary treatment.
The water then passes through selected filtration and purification equipment.
A typical tertiary treatment arrangement may follow these stages.
Stage 1: Secondary-Treated Water Collection
The water discharged from the secondary clarifier of an ETP or STP is collected in a treated water collection tank.
This tank provides temporary storage and helps maintain a consistent supply to the tertiary filtration system.
Stage 2: Multi-Grade Filter (MGF)
The water passes through a Multi-Grade Filter containing multiple layers of filtration media.
Common media include gravel, pebbles, coarse sand, and fine sand.
The filter helps remove remaining suspended particles and reduce turbidity.
Main functions:
- Removes suspended particles.
- Reduces turbidity.
- Improves water clarity.
- Protects downstream filtration equipment.
The filter is periodically backwashed to remove accumulated particles.
Stage 3: Activated Carbon Filter (ACF)
After multi-grade filtration, water passes through an Activated Carbon Filter.
Activated carbon contains a highly porous structure that helps adsorb certain organic compounds and other impurities.
Main functions:
- Reduces certain organic contaminants.
- Helps remove colour-causing compounds.
- Reduces unpleasant odour.
- Removes residual free chlorine where applicable.
- Improves water quality before advanced membrane filtration.
The activated carbon media must be maintained or replaced according to operating conditions.
Stage 4: Micron Cartridge Filtration
A micron cartridge filter may be installed after MGF and ACF to remove finer suspended particles.
It acts as an additional protective barrier before membrane-based treatment equipment.
Different cartridge ratings can be selected according to the UF or RO manufacturer’s feed water requirements.
Stage 5: Ultrafiltration (UF) System
For applications requiring advanced filtration, an Ultrafiltration system can be incorporated into the tertiary treatment plant.
UF membranes remove suspended solids, colloidal particles, bacteria, and many microorganisms through physical membrane separation.
Key functions:
- Removes fine suspended particles.
- Reduces turbidity.
- Retains many bacteria and microorganisms.
- Improves feed water quality for RO systems.
- Supports industrial water recycling.
UF does not significantly remove dissolved salts or TDS. Additional treatment is required if dissolved salt reduction is necessary.
Stage 6: Reverse Osmosis (RO) System
If the treated water contains high dissolved salts or requires low TDS, a Reverse Osmosis system can be installed after suitable pretreatment.
RO membranes separate dissolved salts and other rejected dissolved substances from water.
Key functions:
- Reduces TDS.
- Reduces dissolved salts.
- Removes many dissolved contaminants.
- Produces low-TDS permeate.
- Supports selected industrial water reuse applications.
RO is not required for every tertiary treatment project. It should be selected according to the final water quality requirements and the dissolved contaminant profile.
Stage 7: Disinfection
The final treatment stage may include UV disinfection or chlorination.
These processes help reduce microbiological contamination and provide an additional safety barrier for suitable reuse applications.
Stage 8: Treated Water Storage
The final treated water is collected in a storage tank and supplied for approved industrial, commercial, or non-potable reuse applications.
Main Technologies Used in Tertiary Wastewater Treatment
Different filtration and purification technologies can be combined to achieve the desired water quality.
1. Pressure Sand Filter (PSF)
A Pressure Sand Filter removes suspended solids, turbidity, and other physical impurities from water.
It is commonly installed after secondary treatment to improve water clarity and protect downstream filtration equipment.
2. Multi-Grade Filter (MGF)
An MGF contains multiple filtration media layers that capture suspended particles of different sizes.
It is useful for reducing turbidity and providing pretreatment before advanced filtration.
3. Activated Carbon Filter (ACF)
An Activated Carbon Filter helps reduce certain organic compounds, colour, odour, and residual oxidants such as free chlorine.
It is commonly installed before membrane filtration when required by the water quality and membrane specifications.
4. Ultrafiltration (UF) System
UF uses specialised membrane technology to separate suspended solids, colloidal particles, and many microorganisms from water.
It is particularly useful for tertiary treatment and as pretreatment for industrial RO systems.
5. Reverse Osmosis (RO) Plant
RO is used when dissolved salts and TDS need to be reduced.
It can be integrated into tertiary wastewater treatment systems to produce low-TDS water for suitable industrial applications.
6. UV Disinfection System
UV systems use ultraviolet light to inactivate microorganisms in treated water.
They can be incorporated as an additional disinfection barrier where required.
Applications of Tertiary Wastewater Treatment Plants
Tertiary treatment is useful for industries and commercial establishments that require improved water quality after conventional wastewater treatment.
1. Residential Societies and Apartments
Residential societies generate sewage from bathrooms, kitchens, laundry areas, and other domestic activities.
An STP followed by tertiary filtration and disinfection can produce treated water for suitable applications such as:
- Gardening.
- Toilet flushing.
- Floor cleaning.
- Landscape irrigation.
- Other approved non-potable uses.
2. Hotels and Resorts
Hotels generate wastewater from guest rooms, kitchens, laundry facilities, and other operations.
Tertiary treatment can help improve the quality of STP-treated water for suitable reuse applications.
3. Hospitals and Healthcare Facilities
Hospitals require appropriate sewage and wastewater treatment arrangements.
Tertiary filtration and disinfection can provide additional treatment where required, depending on wastewater characteristics and applicable healthcare wastewater requirements.
4. Textile Industries
Textile wastewater may contain dyes, suspended solids, colour-causing compounds, and residual organic pollutants.
A suitable ETP followed by tertiary filtration or membrane treatment can improve water quality for selected recycling applications.
5. Pharmaceutical Industries
Pharmaceutical manufacturing facilities may generate wastewater containing organic compounds and process-related contaminants.
Advanced treatment technologies can be selected after evaluating wastewater composition and treatability.
6. Food Processing Industries
Food processing wastewater may contain organic matter, suspended solids, oils, and grease.
Tertiary filtration can be incorporated after appropriate biological and preliminary treatment to improve the final water quality.
7. Automobile Industries
Automobile manufacturing and service facilities generate wastewater from washing, cleaning, and industrial operations.
Tertiary filtration systems can help improve the quality of pretreated wastewater for suitable reuse applications.
8. Manufacturing Industries
Manufacturing units that consume large quantities of water can consider tertiary treatment systems to improve wastewater recovery and reduce freshwater requirements.
Benefits of Installing a Tertiary Wastewater Treatment Plant
1. Improved Treated Water Quality
Tertiary treatment provides additional purification after primary and secondary treatment, helping achieve the water quality required for specific applications.
2. Effective Suspended Solids Removal
MGF, PSF, micron filtration, and UF systems help reduce remaining suspended particles and turbidity.
3. Better Water Recycling Opportunities
Treated wastewater can be reused for selected industrial and commercial applications after meeting the relevant quality requirements.
4. Additional Microbiological Protection
UF and suitable disinfection technologies can provide additional barriers against microorganisms.
5. Reduced Freshwater Consumption
Reusing treated wastewater helps reduce the demand for freshwater in suitable applications.
6. Protection of Downstream Equipment
Proper filtration and pretreatment can help protect membrane systems, pumps, and other equipment from excessive particulate loading.
7. Customised Treatment Configuration
Different technologies can be combined according to wastewater characteristics, treatment capacity, and final water quality requirements.
8. Supports Environmental Compliance
A properly designed tertiary treatment system can help facilities achieve applicable discharge or reuse quality requirements when operated and monitored correctly.
Tertiary Wastewater Treatment vs Primary and Secondary Treatment
Wastewater treatment is generally divided into three major stages. Each stage performs a different function.
| Parameter | Primary Treatment | Secondary Treatment | Tertiary Treatment |
|---|---|---|---|
| Main Purpose | Removes larger and settleable solids | Reduces biodegradable organic pollutants | Provides advanced purification |
| Treatment Method | Screening, settling, separation | Biological treatment | Filtration, membranes, disinfection |
| Suspended Solids | Significant reduction | Further reduction | Additional fine particle removal |
| BOD Reduction | Partial | Major biological reduction | Additional reduction where required |
| Microorganisms | Not specifically targeted | Reduced to varying degrees | Additional removal or inactivation |
| Common Equipment | Screens, grit chambers, clarifiers | MBBR, SBR, MBR, ASP | MGF, ACF, UF, RO, UV |
| Main Application | Initial wastewater treatment | Biological wastewater treatment | Water polishing and reuse preparation |
Tertiary Wastewater Treatment Process Flow
The following is a typical process flow for an industrial or commercial tertiary wastewater treatment plant.
Primary and Secondary Treated Water
Water received from the existing ETP or STP.
↓
Stage 1 – MGF / PSF
Reduces suspended solids and turbidity.
↓
Stage 2 – ACF
Adsorbs selected organic impurities and helps reduce colour and odour.
↓
Stage 3 – Micron Filtration
Provides fine particle filtration and protects downstream membranes.
↓
Stage 4 – UF Membrane System
Removes colloidal particles, suspended solids, and many microorganisms.
↓
Optional Stage 5 – RO System
Reduces dissolved salts and TDS when required.
↓
Disinfection and Treated Water Storage
Treated water is stored for suitable reuse or discharge according to applicable standards.
The process can be modified according to the existing ETP/STP configuration and the quality of the incoming secondary-treated water. RO is optional and should only be incorporated when dissolved salt reduction is required.
What Is the Cost of a Tertiary Wastewater Treatment Plant?
The cost of a tertiary wastewater treatment plant depends on treatment capacity, incoming water quality, selected filtration technology, equipment specifications, and final treated water requirements.
The main cost factors include:
- Daily treatment capacity in KLD or KLPH.
- Incoming TSS, turbidity, BOD, COD, and TDS.
- MGF and PSF vessel size.
- Activated carbon quantity.
- Micron cartridge specifications.
- UF membrane type and surface area.
- RO membrane specifications, if required.
- Feed and backwash pump capacity.
- Chemical dosing systems.
- Automation and control panel.
- Storage tank requirements.
- Piping and installation.
- Electrical connections and commissioning.
A tertiary treatment plant designed only for filtration and disinfection will have different requirements from a system incorporating UF and RO membrane technologies.
For an accurate quotation, it is important to evaluate the existing ETP/STP treated water report and the desired final water quality.
Factors to Consider Before Installing a Tertiary Wastewater Treatment Plant
Before selecting a tertiary treatment system, consider these important factors:
- Existing ETP/STP Performance: Evaluate the quality of water leaving the secondary treatment stage.
- Daily Flow Rate: Determine the required treatment capacity in KLD or KLPH.
- Water Quality Analysis: Test TSS, turbidity, BOD, COD, TDS, pH, hardness, and other relevant parameters.
- Reuse Requirements: Identify whether treated water will be used for gardening, cooling towers, washing, or industrial processes.
- Filtration Technology: Select MGF, ACF, micron filtration, UF, and RO according to the treatment objectives.
- Membrane Compatibility: Check feed water quality against UF and RO membrane manufacturer requirements.
- Chemical Requirements: Evaluate antiscalant, cleaning chemicals, and other dosing requirements.
- Sludge and Reject Management: Plan appropriate management of filter backwash, sludge, and RO reject.
- Automation: Consider PLC-based monitoring and control for reliable operation.
- Operating Costs: Evaluate electricity, filter media replacement, membrane cleaning, and routine maintenance.
Why Choose V AQUA Water Treatment Company?
V AQUA Water Treatment Company provides customised industrial and commercial water treatment solutions, including advanced filtration and wastewater recycling systems.
We understand that tertiary treatment requirements differ from one project to another. Some facilities need only MGF and ACF filtration, while others require UF, RO, or additional disinfection to achieve the desired treated water quality.
Our treatment solutions can be configured according to existing ETP/STP performance, wastewater characteristics, plant capacity, and intended water reuse applications.
Reasons to Consider V AQUA
- Customised tertiary wastewater treatment solutions.
- Industrial and commercial filtration systems.
- Multi-grade and pressure sand filtration.
- Activated carbon filtration systems.
- Ultrafiltration membrane plants.
- Industrial RO water treatment systems.
- Integrated ETP/STP filtration configurations.
- PLC-based automation options.
- Solutions for industrial water recycling and reuse.
Whether you want to upgrade an existing sewage treatment plant or install an advanced tertiary filtration system after an industrial ETP, V AQUA can help you explore a suitable configuration.
Frequently Asked Questions (FAQs)
1. What is a tertiary wastewater treatment plant?
A tertiary wastewater treatment plant is an advanced treatment system installed after primary and secondary treatment to further improve water quality through filtration, membrane separation, disinfection, or other specialised processes.
2. What is the difference between secondary and tertiary wastewater treatment?
Secondary treatment primarily uses biological processes to reduce biodegradable organic pollutants. Tertiary treatment provides additional purification to remove remaining suspended particles, nutrients, dissolved contaminants, or microorganisms, depending on the treatment requirements.
3. Which filters are used in tertiary wastewater treatment?
Common filtration equipment includes pressure sand filters, multi-grade filters, activated carbon filters, micron cartridge filters, and ultrafiltration systems.
4. Is RO necessary in tertiary wastewater treatment?
No. RO is not required for every tertiary treatment plant. It is generally incorporated when dissolved salts, TDS, or other dissolved contaminants need to be reduced to meet the final water quality requirements.
5. Can tertiary-treated wastewater be reused?
Yes. Properly treated wastewater can be reused for suitable applications such as gardening, toilet flushing, floor washing, cooling tower makeup, and certain industrial processes, provided it meets the applicable quality standards.
6. What is the role of UF in tertiary treatment?
UF membranes remove fine suspended solids, colloidal particles, and many microorganisms. UF is commonly used when improved filtration quality or RO pretreatment is required.
7. Can an existing STP be upgraded with tertiary treatment?
Yes. An existing STP can often be upgraded by adding filtration, UF, disinfection, or RO equipment. The proposed configuration should be based on the existing plant’s performance and treated water quality.
8. What capacity tertiary treatment plant should I install?
The required capacity depends on the quantity of secondary-treated wastewater, peak flow, operating hours, and intended reuse requirements. A technical assessment is recommended before finalising the plant design.
9. Does V AQUA provide customised tertiary wastewater treatment plants?
V AQUA offers customised industrial and commercial filtration and water treatment solutions. Tertiary treatment configurations can be evaluated according to individual project requirements.
10. How can I get a quotation for a tertiary wastewater treatment plant?
Contact V AQUA with your existing ETP/STP capacity, treated water analysis report, required treatment capacity, intended reuse application, and installation location. This information helps in preparing an appropriate technical proposal.
Conclusion
A Tertiary Wastewater Treatment Plant plays an important role in improving the quality of water after primary and secondary treatment. By combining MGF, ACF, micron filtration, UF, RO, and disinfection technologies where required, businesses can develop an effective wastewater polishing and recycling system.
The right treatment configuration depends on incoming water quality, required treated water specifications, plant capacity, and the intended reuse application.
V AQUA Water Treatment Company offers customised filtration and wastewater recycling solutions for industrial, commercial, and residential requirements.
If you are planning to install a tertiary wastewater treatment plant or upgrade an existing ETP/STP, contact V AQUA to discuss your project requirements.
Contact V AQUA Water Treatment Company
V AQUA Water Treatment Company
- Mobile: +91 7827654995 / +91 9560654995
- Email: sales@vaqua.in
- Website: https://vaqua.in
- Explore Products: https://roservicepoint.com/services/
Looking for a Tertiary Wastewater Treatment Plant for your industry, hotel, hospital, residential society, or commercial facility? Contact V AQUA today for a customised filtration and water recycling solution.
Technical note: Tertiary treatment is not necessarily a fixed sequence of MGF → ACF → UF → RO. The actual process should be selected using secondary-treated water test results. For example, RO is optional, and nutrient removal or disinfection may be more important than RO for some discharge or reuse applications.
