Sign up & enjoy 20% off
Free shipping in Delhi/NCR
Welcome to V Aqua
India's Trusted Brand
5308+ Satisfied Customer
Call : 9560654995 / 7827654995
Flat 20% OFF
Oil and Grease Removal System

Oil and Grease Removal System Manufacturer

Oil and grease are common contaminants in industrial wastewater generated by automobile industries, food processing units, manufacturing facilities, engineering plants, hotels, refineries, and other commercial and industrial operations. If this wastewater is discharged without proper treatment, it can cause environmental pollution, pipeline blockages, equipment fouling, and operational problems in wastewater treatment systems.

An Oil and Grease Removal System is an important part of an industrial Effluent Treatment Plant (ETP). It helps remove oil, grease, suspended impurities, and other pollutants from industrial wastewater.

For industries looking for better treated-water quality and water reuse, a conventional ETP plant can be integrated with advanced filtration technologies such as Pressure Sand Filtration (PSF), Activated Carbon Filtration (ACF), Ultrafiltration (UF), and Reverse Osmosis (RO).

V AQUA Water Treatment Company provides customised industrial wastewater treatment solutions, combining ETP plants with advanced filtration systems according to wastewater characteristics and the required treated-water quality.

What Is an Oil and Grease Removal System?

An Oil and Grease Removal System is designed to remove oil, fats, grease, and other oily contaminants from industrial wastewater.

Oil and grease are generally lighter than water, allowing free oil droplets to separate and float towards the surface under suitable conditions. The collected oil can then be removed through an oil skimmer or other separation equipment.

However, industrial wastewater may also contain emulsified oil, dissolved pollutants, suspended solids, organic matter, and high TDS. These contaminants cannot all be removed by a simple oil separator.

For this reason, industries often require a complete ETP plant followed by additional filtration and purification systems to achieve the desired treated-water quality.

Why Is an Oil and Grease Removal System Required?

Oil and grease can affect the performance of wastewater treatment equipment and reduce the efficiency of downstream treatment processes.

A properly designed treatment system helps:

  • Remove free oil and floating grease from industrial wastewater.
  • Reduce the pollutant load entering biological treatment.
  • Protect pumps, pipelines, filters, and membranes.
  • Minimise fouling in UF and RO systems.
  • Improve the overall performance of the ETP plant.
  • Support treated-water reuse in industrial applications.
  • Help industries meet applicable wastewater discharge requirements.

The complete treatment process should be designed according to the wastewater test report and the final water quality requirement.

Complete Oil and Grease Removal Process Using ETP, UF and RO Plants

For industrial wastewater containing oil and grease, V AQUA recommends a treatment approach based on the actual wastewater characteristics. The first stage is the ETP plant. Advanced filtration and purification systems can be added after ETP treatment when required.

Stage 1: Effluent Treatment Plant (ETP)

<AsyncImage query=”industrial effluent treatment plant ETP wastewater treatment tanks pipes clarifier industrial facility” aspectRatio=”16:9″ width=”100%”/>

The ETP plant is the primary treatment system for industrial wastewater. It is designed to reduce oil and grease, suspended solids, organic pollutants, and other contaminants before the water enters advanced filtration.

A typical ETP process may include:

1. Screening: Removes large floating materials, plastics, fibres, and other physical impurities.

2. Oil and Grease Separator: Separates free-floating oil and grease from wastewater using gravity separation, coalescing arrangements, or oil skimmers, depending on the application.

3. Equalisation Tank: Collects wastewater and balances variations in flow and pollutant concentration.

4. Chemical Treatment: Coagulants and flocculants may be added to help remove fine suspended particles and emulsified oil.

5. Primary Clarifier or DAF System: Separates suspended flocs, floating oil, and other removable impurities. DAF may be selected where fine or emulsified oil requires flotation-based separation.

6. Biological Treatment: Where biodegradable organic pollution is present, biological treatment such as MBBR, MBR, or another suitable process may be used.

7. Secondary Clarifier: Separates biological sludge from treated wastewater where the selected biological process requires clarification.

After ETP treatment, the wastewater undergoes further treatment if the required water quality is higher than the ETP outlet can provide.

The exact ETP configuration depends on the type of industry, wastewater composition, oil and grease concentration, COD, BOD, TSS, and other relevant parameters.

Stage 2: Advanced Filtration System – MGF/PSF and ACF

<AsyncImage query=”industrial pressure sand filter and activated carbon filter water treatment vertical pressure vessels” aspectRatio=”16:9″ width=”100%”/>

After the ETP plant, treated wastewater can be passed through an advanced filtration system to remove remaining suspended particles, fine impurities, and certain organic compounds.

This stage commonly includes:

Multimedia Filter (MGF) or Pressure Sand Filter (PSF): Removes residual suspended solids, turbidity, and fine particulate matter.

Activated Carbon Filter (ACF): Helps reduce certain dissolved organic compounds, colour, and residual odour, depending on the wastewater characteristics.

Micron Cartridge Filter: Provides additional particle filtration and protects downstream UF or RO membranes from larger particles.

These filtration stages help improve the feed-water quality before membrane treatment.

Stage 3: Ultrafiltration (UF) Plant

<AsyncImage query=”industrial ultrafiltration UF membrane water treatment skid stainless steel PVC pipes membrane modules” aspectRatio=”16:9″ width=”100%”/>

If the industry requires advanced filtration and better-quality treated water, an Ultrafiltration (UF) plant can be installed after the ETP and pre-filtration stages.

UF is a membrane-based filtration technology that removes:

  • Fine suspended solids.
  • Colloidal particles.
  • Remaining turbidity.
  • Many bacteria and other microorganisms.
  • Other particles larger than the membrane’s effective separation range.

UF produces more consistent feed water for a downstream RO plant and helps reduce membrane fouling when properly operated.

Important: UF does not remove dissolved salts or significantly reduce TDS. If the application requires dissolved salt removal, an RO plant may be required after UF.

Stage 4: Reverse Osmosis (RO) Plant

<AsyncImage query=”industrial reverse osmosis RO water treatment plant stainless steel membrane pressure vessels industrial skid” aspectRatio=”16:9″ width=”100%”/>

For industries that require further purification and reduction of dissolved salts, a Reverse Osmosis (RO) plant can be installed after the UF system.

RO uses a semi-permeable membrane to separate a large proportion of dissolved salts and other dissolved constituents from water.

An RO plant can help reduce:

  • Total Dissolved Solids (TDS).
  • Dissolved salts.
  • Certain dissolved inorganic contaminants.
  • Other constituents depending on membrane selection and operating conditions.

The RO plant produces two streams:

  • RO Permeate: Purified water that may be suitable for industrial reuse, depending on its quality and application.
  • RO Reject: A concentrated stream containing the rejected salts and contaminants that requires suitable management and disposal.

RO recovery, membrane selection, and reject management should be planned according to feed-water quality and site requirements.

Complete Process Flow: ETP + Advanced Filtration + UF + RO

For industrial wastewater containing oil and grease, the following is an illustrative process arrangement:

Industrial Wastewater → Screening → Oil and Grease Removal → ETP Plant → MGF/PSF → ACF → Micron Cartridge Filter → UF Plant → RO Plant → Treated Water Storage Tank

The treatment stages can be selected according to the required output:

  • ETP only: Where the objective is to treat industrial wastewater to meet applicable discharge or reuse requirements.
  • ETP + Advanced Filtration: Where additional suspended-solids, turbidity, colour, or organic-compound reduction is required.
  • ETP + Advanced Filtration + UF: Where finer filtration and improved membrane-feed quality are required.
  • ETP + Advanced Filtration + UF + RO: Where further purification and dissolved salt/TDS reduction are required.

Not every industry needs all four stages. The correct system should be selected after evaluating wastewater test results and the intended use of treated water.

Industries That Require Oil and Grease Removal with ETP and Advanced Filtration

Oil and grease removal systems integrated with ETP plants are useful in industries where wastewater contains oily contaminants and other industrial pollutants.

IndustryCommon Wastewater Contaminants
Automobile IndustryEngine oil, lubricants, grease, suspended solids
Food Processing IndustryFats, cooking oil, organic matter
Dairy IndustryMilk fats, oils, organic waste
Engineering IndustryCutting oil, coolants, lubricants
Metal Processing IndustryHydraulic oil, grease, suspended particles
Textile IndustryProcessing chemicals, oil, colour and suspended solids
Oil and Gas IndustryHydrocarbons, oil and suspended solids
Pharmaceutical IndustryProcess-related organic and chemical contaminants
Hotel and RestaurantCooking grease, fats and food residues
Manufacturing UnitsMachine oils, lubricants and process wastewater

The required treatment configuration varies depending on the source and composition of the wastewater.

Benefits of Combining ETP, UF and RO Technology

Integrating an ETP plant with advanced filtration can provide a more comprehensive wastewater treatment solution.

1. Better Oil and Grease Removal: The ETP’s initial treatment stages separate free oil and grease and address other pollutants.

2. Improved Water Quality: Additional filtration helps reduce suspended solids, turbidity, and other remaining impurities.

3. Better Membrane Protection: Suitable pretreatment and UF can reduce the risk of suspended-particle fouling in downstream RO membranes.

4. Water Reuse Opportunities: Properly treated water may be reused in suitable industrial applications, subject to quality requirements.

5. Reduced Freshwater Consumption: Reusing treated wastewater can help reduce dependence on fresh water.

6. Customised Treatment: The system can be designed according to the industry’s actual wastewater characteristics and water reuse objectives.

Factors to Consider Before Selecting an ETP, UF and RO Plant

Before selecting an oil and grease removal system or a complete wastewater treatment plant, industries should evaluate the following parameters:

  • Wastewater generation capacity in KLD or m³/hr.
  • Oil and grease concentration.
  • pH value.
  • BOD and COD levels.
  • Total Suspended Solids (TSS).
  • Total Dissolved Solids (TDS).
  • Turbidity and colour.
  • Type of oil: free, dispersed, or emulsified.
  • Required treated-water quality.
  • Whether treated water will be discharged or reused.
  • Available installation space.
  • Sludge, separated oil, and RO reject management requirements.

A wastewater laboratory analysis is recommended before finalising the treatment process and equipment sizing.

Oil and Grease Removal System and ETP Plant Price in India

The cost of an Oil and Grease Removal System depends on the wastewater generation capacity, initial pollutant concentration, treatment technology, and required treated-water quality.

A basic ETP plant with an oil and grease separator will have a different cost compared with an integrated system containing advanced filtration, UF, and RO.

Major cost factors include:

  • ETP plant capacity in KLD.
  • Oil and grease separator design.
  • Chemical dosing and DAF requirements.
  • Biological treatment technology, if required.
  • MGF/PSF and ACF filtration systems.
  • UF membrane capacity and configuration.
  • RO plant capacity and membrane selection.
  • Pumps, tanks, piping, and control panels.
  • Automation, installation, and commissioning.
  • Sludge and reject-water management arrangements.

For an accurate quotation, the wastewater analysis report and required treatment capacity should be shared with the technical team.

Why Choose V AQUA for Oil and Grease Removal and ETP Plants?

V AQUA Water Treatment Company provides customised industrial wastewater treatment solutions for different industries and applications.

We offer treatment systems designed around the wastewater source, treatment capacity, and required treated-water quality.

Our solutions include:

  • Industrial Effluent Treatment Plants (ETP).
  • Oil and Grease Removal Systems.
  • Oil-Water Separators and Oil Skimmers.
  • Chemical Treatment and DAF Systems.
  • Pressure Sand and Multimedia Filtration Systems.
  • Activated Carbon Filtration Systems.
  • Ultrafiltration (UF) Plants.
  • Reverse Osmosis (RO) Plants.
  • Integrated wastewater treatment and reuse solutions.

Whether you require an ETP plant for oil and grease removal or a complete advanced treatment system with UF and RO, V AQUA can help you select a suitable configuration for your industrial wastewater.

Frequently Asked Questions (FAQs)

1. What is an Oil and Grease Removal System in an ETP plant?

It is a treatment arrangement used to separate free oil, grease, and suitable oily particles from industrial wastewater. It is generally installed at the initial stages of an ETP plant.

2. Can an ETP plant remove oil and grease from industrial wastewater?

Yes. An appropriately designed ETP can include oil-water separation, skimming, chemical treatment, and DAF where required to reduce oil and grease along with other wastewater pollutants.

3. What is the process after an ETP plant?

After ETP treatment, water can pass through MGF/PSF, ACF, and micron filtration. UF and RO can be added when finer filtration or dissolved salt reduction is required.

4. Why is a UF plant installed after an ETP plant?

UF removes fine suspended solids, colloidal particles, and many microorganisms. It helps improve water quality and can provide better feed water for a downstream RO plant.

5. Does UF remove TDS from wastewater?

No. UF mainly removes suspended and colloidal impurities. It does not significantly remove dissolved salts or reduce TDS.

6. Why is an RO plant required after UF?

An RO plant may be installed when treated wastewater requires further purification, particularly for reducing dissolved salts and TDS. UF acts as a pretreatment stage to help protect the RO membranes.

7. Is it necessary to install both UF and RO after an ETP plant?

No. The requirement depends on the intended use of treated water. An ETP plant may be sufficient for some discharge or reuse applications, while other applications may require advanced filtration, UF, and RO.

8. Can treated wastewater from an ETP and RO plant be reused?

It may be reused for suitable industrial applications after confirming that the treated-water quality meets the specific process requirements. RO reject must also be managed appropriately.

9. Which industries require an Oil and Grease Removal System?

Automobile, food processing, dairy, engineering, metal processing, textile, petroleum, hotel, and manufacturing industries may require oil and grease removal depending on their wastewater characteristics.

10. How can I get a quotation for an ETP plant with UF and RO?

Share your wastewater generation capacity, laboratory test report, and required treated-water quality with V AQUA. The technical team can evaluate the requirements and recommend a suitable treatment configuration.

Contact V AQUA for Oil and Grease Removal System and ETP Plant

Looking for an Oil and Grease Removal System Manufacturer in India or a customised industrial ETP plant with advanced filtration?

Contact V AQUA Water Treatment Company for industrial wastewater treatment solutions, including ETP, UF, and RO plants.

V AQUA Water Treatment Company

Contact our team to discuss your wastewater treatment requirements and get a suitable solution for your industry.

Shopping cart

0
image/svg+xml

No products in the cart.

Continue Shopping
What Our Clients Say
3750 reviews